DIY Burglar Alarm Kits
Would you like to protect your property yourself? Are you on a limited budget? Or are you just keen to have a go? We are pleased to offer a choice of DIY alarm kits designed specifically for installing by home owners or business staff. No complex wiring. No specialist skills needed. If you can use a few basic tools, fitting these alarms is very straightforward.
Choose from the following top quality burglar alarm kits for DIY installation. They are both designed for easy fitting by any person with basic DIY skills and full, clear instructions are included in the kits.
Buy on-line with payments by PayPal or via mail order. We despatch products on receipt of cleared funds and delivery is normally within a few days.
Please read our main terms and conditions before purchasing. Prices are correct at 28/07/2004. We do our best to keep prices and product information up to date but details on this page are subject to change at any time.
Pyronix Sterling 10 Alarm Kit
- 1 x Sterling 10, 10 Zone Control Panel with LCD Remote Keypad
- 3 x Colt PIR Motion Detectors
- 2 x Surface Door Contacts
- 1 x Belle Bell Box
- 1 x Fused Spur with Back Box
- 1 x 12v 2.8 Ah Battery
- 1 x 100m of 6 Core Alarm Cable
- 1 x Full Set of Installation Diagrams and Instructions
- This product also comes with a customer help-line number charged at national rates
Total cost - £150.00
Plus Postage and Packing (within UK mainland) £10.50
Options
- Extra PIR - £14.00
- Extra Door Contact - £1.50
The Four Zone 2 Wire System LS400
This easy to install DIY alarm kit needs only a simple two conductor flat wire to conect all the components
making it probably the simplest alarm for DIY installation.
Operation of the alarm is equally straight-forward. Convenient push button, three mode, Home - Out - Off settings are pre-programmed into the control panel avoiding any complicated setting up by the owner. A four digit pin code is used for disarming and there are additional duress and panic alarm codes for emergencies. The entrance and exit delay times are easily selectable.
The unit has a built in siren sounder with external siren capability. door chime function for Off mode operation, alarm hold indication low battery indicator. The system can also be expanded with a built in connection to a voice dialler for added security.
- 1 x Two Wire Alarm Panel
- 2 x Two Wire PIRS
- 2 x PIR Mounting Bracket
- 4 x Two Wire Magnetic Door Contacts
- 1 x Two Wire External Bell Box
- 1 x AC Adaptor
- 1 x 50m Roll of Two Wire Cable
- 1 x Packet of Cable Clips
- 1 x Instruction Manual
Total cost - £65.00
Plus Postage and Packing (within UK mainland) £10.50
Options
- 1 x Two Wire PIRS - £10.00
- 1 x Two Wire Door Contacts - £1.50
All information on this page is subject to change without notice. The publishers accept no liability for loss or injury arising from use of the information on this web site. Due to technical reasons, colours shown may not be reproduced accurately. All sizes shown are approximate. Prices exclude delivery and taxes unless stated otherwise.
